| |
| |
|
Magentic Filter Pads...
Add-Vantage 9000 series...
Hydraulic & Pneumatic Applications...
Gearbox Applications...
Oil & Gas Applications...
Manufacturing Applications...
Fuel & Coolant & Water Applications...
Food & Pharmaceutical Applications...
|
| |
| |
| |
| Customer & Application References |
| |
| I am the Farm Boss for Brightstone Hutterite Colony which farms nearly 6200 acres, near Lac Du Bonnet, Manitoba. To date we have tested the FM 300 and FM 800 models on several pieces of equipment, including semi trailer tractors, tractors, my pickup and our filter on our diesel fuel tank. We have cut open several filters and have seen positive results. We are sure the Filter Master works; so sure, that we intend to have all of our machines equipped with the Filter Master by spring seeding. I feel that the Filter Master will save us costly downtime and maintenance on engines, hydrostatic transmissions, fuel injectors and injector pumps. We can't afford downtime during the busy seasons when our equipment is needed most. We are recommending Filter Master to other colonies and farmers who wish to reduce costs, and increase operating time and profits.
Peter Waldner
Farm Boss
Brightstone Hutterite Colony
Lac Du Bonnet, Manitoba, Canada |
----------------------------------------------------------------------- |
| "In September of 1998, I tested the Filter Master FM 1200 on one of our Pilot Boats equipped with a Detroit Diesel 12 v 71 that has a 12 micron oil filter.
I noticed a reduction of ferrous contaminants in my oil analysis. I opened the filter and had the trapped iron metal analyzed for particular size. The average size was 1.25 by 6 microns. The filter is not removing the more damaging metal particles from the oil. I feel the Filter Master will increase engine longevity and result in considerable savings to my company."
J.K. Spencer Parker
Engineer
Pacific Pilotage Corp. |
----------------------------------------------------------------------- |
| "In October 1998, Newalta tested the Filter Master FM 800 on one of out Kenworth trucks powered by a Cat Diesel. I was so impressed at the ease of installation; no assembly, no retrofitting. We tested the FM 800 for 250 hours, and when we opened the oil filter, we were surprised and impressed with the amount of trapped ferrous metal the oil filter missed. The removal of these fine metal contaminants will have a positive affect on engine life. I recommend this high quality new product for your industrial equipment or personal vehicle."
Frank Lucci
Newalta Corp.
Prince George, B.C. Canada |
----------------------------------------------------------------------- |
| "As an owner of a '94 Kenworth, I am concerned about reliability and durability. I was very interested in using the Filter Master on both my oil and fuel filters. Both Filter Masters brought about very interesting results.
The oil and fuel filters had metal particles trapped inside when cut open for inspection. This keeps my engine oil cleaner, resulting in less wear and cleans my fuel, increasing the durability and efficiency of my electronic fuel injectors. This reduces my maintenance costs considerably. I have tested this product for the last 18 months and I am so pleased, I use them on my antique and new vehicles."
Randy Olynik
Calgary, Alberta, Canada |
----------------------------------------------------------------------- |
| "In March of 1998, we tested the Filter Master FM 800 on a hydraulic in our steel plant. We use the FM 800 on the transport trucks and were impressed and felt it would help us with ferrous contamination in our hydraulic systems. We tested the FM 800 on a cut to length shear. This unit uses a spray nozzle to lubricate U-joints and was plugging several times a shift. After a month of testing the nozzles did not plug, we opened the filter up and were amazed at the amount of ferrous metal trapped. We installed the FM 800, FM 1200, and the FM 2000 on all our equipment. By cutting down on ferrous contamination in our hydraulic systems we reduced down time. I recommend the Filter Master to all companies wishing to enhance their preventative maintenance programs."
Bruce Filion
Drummond McCall
Winnipeg, Manitoba, Canada |
----------------------------------------------------------------------- |
| "We installed Filter Masters on our Tug engines and hydraulic systems as well as on our pickups.
It is my personal conviction that the Filter Master will add significant hours to the lifetime of any internal combustion engine or hydraulic systems.
Our equipment is in the extreme service category requiring frequent oil changes and regular engine rebuilds. From visual observation of the filters cut open equipped with the Filter Master , we were amazed at the amount of ferrous material collected. We would not hesitate in recommending this product for external filtration systems for either industrial or personal use. The product is long overdue. "
Capt.T.R.Witcher
Mica Marine Limited
Golden, B.C. Canada |
----------------------------------------------------------------------- |
| In October 1997, I tested the Filter Master FM 800 on fuel and oil filters on my 98 Freightliner (Series 60 Detroit Diesel). I was impressed with the amount of metal trapped in the oil filter that was missed by the standard filter. When I opened up the fuel filter I was astounded with the amount of metal collected and trapped by the Filter Master . I travel northern Canada with exposure to minus 30 to plus 110 degrees F. The Filter Master withstood gravel, snow, slush and salt. I was so impressed with the Filter Master I installed them on all my vehicles and highly recommend the product for your equipment or vehicles.
Robert F. McAfee
McAfee Trucking Inc.
Selkirk, Manitoba, Canada |
----------------------------------------------------------------------- |
| "After testing the Filter Master on many different engines in our Kenworth trucks, a significant amount of ferrous metal particles were trapped to the side of the filter housing that the Filter Master has been attached to. This device obviously traps metal particles that the filter itself cannot catch. If we can reduce the amount of abrasive material that circulates within our engine, we can increase engine life.
It's just that simple.
As Service Manager of a large fleet of trucks, I have to constantly look at ways of increasing the longevity of my engines. The Filter Master requires no skill in installing. Just slap it on. No tools required. No maintenance, and reusable. It works!! "
John Wilson
PacLease
Calgary, Alberta, Canada |
----------------------------------------------------------------------- |
| "I operate a mechanical company specializing in housing construction in Calgary. In the month of November 1998 I purchased and installed a FM 6000 metal extractor in the reservoir of my new 535 Ridgit threading machine to reduce the metal contaminants in the cutting oil. The results have been amazing; the thread quality has improved dramatically, reducing leaks, and I have not replaced the dies or any other parts for the past year. This has increased my production and reduced operating costs. The design of the FM 6000 clearly outperforms any other magnetic product for this application with its multiple powerful magnetic fields and ease of cleaning.
I highly recommend the Filter Master products to anyone with a preventative maintenance program as you will improve your bottom line."
Wieler Mechanical
Calgary, Alberta, Canada |
----------------------------------------------------------------------- |
"As you are aware, we started using the Filter Master on our Nitro-Coupe car last year. I am happy to report a zero bearing failure in the 1999 season. Over one hundred passes at 200 MPH in 6 seconds for a 2600-LB car using nitro methane fuel. Thanks for the fine product. P.S. We now have 360,000 miles on our tow rig with no engine problems."
Mel Eaves,
Owner/Driver Mega Power Nitro-Coupe
Bayonet Point,FL |
----------------------------------------------------------------------- |
"I am writing you to let you know the results of your products. I installed your scrubber system FM4000 in my fuel transfer and cleaning system aboard a new 63 foot yacht I recently commissioned. After a trip to the Northwest and back to Newport Beach, California, I cleaned the magnetic rod in the BT4000 and was able to remove approximately 1 teaspoon of fine metal particles. After the first 100 hours on my new engines (twin Cats 3406), I changed the engine oil filters, opened them up and again found an amazing amount of fine metal debris attached to the filter canister. I also found a significant amount at 200 as well as 300 hours. The results were the same for my generators as well. I am glad I chose your product over the others after seeing the results and the ease of cleaning the scrubber. I want to let you know how well your products are working and how much they are protecting the investment the owner has put into this boat."
Captain Nelson Merz, M/Y Dream
Newport Beach, CA |
----------------------------------------------------------------------- |
| "In June of 1999 we purchased seven FM 6002 metal extractors for our threading machines, the results are astonishing, the filtration of metal contaminants in the cutting oil has improved a thousand percent. The design of this magnetic filters with its multiple high strength magnetic fields and ease of cleaning is perfect for this application. Our operational time has improved and replacement costs for dies and parts decreased dramatically. It is so effective we have not replaced our dies since the installation of the magnetic filters.
As the head purchaser for our company I with great confidence recommend the Filter Master products for all your filtration needs as they will increase your operating time, reduce parts and maintenance costs and increase your profitability."
Marty Kleisenger
Canyon Plumbing & Heating LTD
Calgary, Alberta, Canada |
----------------------------------------------------------------------- |
| "I have been testing the Filter Master for thirty months with amazing results. I have been in the logging industry for twenty-five years. I run crawler tractors, rubber tire loaders, excavators, skidders and faller bunchers. As a contractor, equipment availability affects the bottom line.
I am very impressed with the ease of installation, no retrofitting costs, it is very durable and is reusable again and again. I believe that the Filter Master has increased the engine life of my crawler. It has 14,090 hrs, bottom line savings. I use the Filter Master on all my hydraulic systems with positive results, no hydraulic failures as substantial amounts of ferrous metal have been removed from these systems. I use the Filter Master on all my fuel systems with great results. I strongly recommend using the Filter Master on all engine, hydraulic and fuel systems.
As of February 2000 our crawler tractor has reached 17,500 hours and is still running strong. We attribute this to our preventative maintenance program of which the Filter Master is the main reason for the extended engine life."
KATS logging
Golden, B.C. Canada |
 |
|
